FANTASIA – Design Criteria

1. Fiberglass lamination of the hull and deck shall be in accordance with the highest standards of marine practices, to exceed Lloyds specifications.
    

2. All structural bonding, joinery, electrical wiring, fittings, hardware, and other marine details shall conform to the highest standards of marine practice, and to the architect's plans and specifications.
    

3. Standing rigging shall be of stainless steel throughout and to conform to the architect's specifications as minimum standards.
    

4. Sails shall be of first quality and shall conform to the architect's sail plan.
    

5. Spars shall be of aluminum and of a section and construction as to conform to the architect's specifications.
    

6. Electrical system shall conform to the architect's wiring diagram and shall include (12/110 Volt) appropriate lights throughout, outlets, and 110 Volt shore connection.
    

7. All trim, interior and exterior, including hatches shall be of oiled teak. Cabin sole shall be teak throughout.
    

8. Pressure water system shall be installed in accordance with the architect's piping diagram.
    

9. Fuel and water tanks shall be fully baffled and installed in accordance with the architect's tankage and piping diagrams.
    

10. A diesel engine of approved make shall be installed in accordance with manufacturer's and architectect's installation diagram.
     

11. Emergency tiller steering shall be installed in accordance with architect's plan.

(Architect's plans and drawings are available for review.)

Specifications may be modified, or deleted, subject to availability of parts, materials, design changes, or cost factors.